Technical Training Courses
Assessment checklist Star Level 1 for Construction / Industrial rack and pinion products
Assessment checklist Star Level 1 for Construction / Industrial rack and pinion products
Utbildning för Svenska Besiktningsmän
Genom teoretisk och praktiska övningar, Ska man som besiktningsman kunna genomföra en besiktning på ett säkert sätt och veta vad som ska kontrolleras samt vilka toleranser/regler som gäller.
Level 3: Advanced Knowledge in Fault Finding and Programming of Controllers for Industrial rack and pinion products
This is the third level Training plan, which is a part of the Technician Training Pathway for Industrial Vertical Access Equipment Rack and Pinion Technology.
Assessment checklist Star Level 3 for Industrial rack and pinion products
This is an assessment for being recognized as a Technician for Industrial rack and pinion products. Candidate is assessed via comprehensive checklist of criteria. The assessment includes both theoretical and practical skills. Assessments have to be conducted and signed by an approved person (Assessor) within Alimak Group organization.
Assessment checklist Star Level 2 for Industrial rack and pinion products
This is an assessment for being recognized as an Apprentice for Industrial rack and pinion products. Candidate is assessed via comprehensive checklist of criteria. The assessment includes both theoretical and practical skills. Assessments have to be conducted and signed by an approved person (Assessor) within Alimak Group organization.
Level 3: Advanced Knowledge in Fault Finding and Programming of Controllers for Industrial rack and pinion products
This is the third level Training plan, which is a part of the Technician Training Pathway for Industrial Vertical Access Equipment Rack and Pinion Technology. It aims to teach you more advanced knowledge about the main control systems used in Industrial R&P products such as ALC 2, VFC. You will also learn about the electrical fault finding in control systems.
Level 2: Acquaintance with Controllers, Maintenance and Installation for Industrial rack and pinion products
This is the second level Training plan, which is a part of the Technician Training Pathway for Industrial Vertical Access Equipment Rack and Pinion Technology.
Mastering Control Systems for Alimak Industrial rack and pinion products – ALC, VFC
The training shall provide the participant with the ability to perform safe planning and preparation before beginning any tasks. The participant will demonstrate safe work practices when handling equipment.
Mastering Control Systems for Alimak Construction rack and pinion products – ALC, VFC
The training shall provide the participant with the ability to perform safe planning and preparation before beginning any tasks. The participant will demonstrate safe work practices when handling equipment.
Core Principles for Maintenance and Installation of Construction Alimak Products
Through theoretical and practical training, the participant is instructed in the principles of maintenance and installation of Construction rack and pinion products. This will include pre-installation activities, planning, positioning and tying to a structure.
Mastering Control Systems for Alimak Industrial rack and pinion products – ALC, VFC
The training shall provide the participant with the ability to perform safe planning and preparation before beginning any tasks. The participant will demonstrate safe work practices when handling equipment.
Core Principles for Maintenance and Installation of Alimak Industrial rack and pinion products
Through theoretical and practical training, the participant will be instructed to safely operate and perform preventive maintenance and service on industrial elevators. This will include pre-installation activities, planning, positioning and tying to a structure.
Technical Training : Industrial Elevators – SE Ex, Non – Ex, and DOL Relay Types
Through theoretical and practical training, the participant has been introduced to Alimak subsystems as Electrical system, ALCII, Vacon VFC, OSD-5 and SE-EX equipment. The training provides competences to our distributor service team to handle various types of industrial units. including Ex, Non-Ex, DOL, and Relay types. The Training has been performed on two levels: LEVEL 2 for newcomers, along with recommended E-learning modules LEVEL 3 for experienced individuals who already possess the certificates attached.
Construction Product Training and Fundaments of Rack and Pinion
Through classroom training the participant will be instructed to safely operate, install and maintain construction lifts.
Pathway for Alimak Trainers at Level 5 for Industrial rack and pinion
An Experienced Trainer with a 5 Star Technician Education can teach all Alimak courses below his level (4-1) This applies for courses part of the Pathway for Vertical Access Equipment based on a Rack and Pinion Technology for Industrial.
Pathway for Alimak Trainers at Level 4 for Industrial rack and pinion
An Experienced Trainer with a 4 Star Technician Education can teach all Alimak courses below his level (3-1) This applies for courses part of the Pathway for Vertical Access Equipment based on a Rack and Pinion Technology for Industrial.
Assessment for becoming Alimak Trainer at Level 5 for Industrial rack and pinon
This module provides assessment of your overall trainer skills -theoretical and practical. As an outcome of this assessment you will become one of the Alimak Group Trainers.
Assessment for becoming Alimak Trainer at Level 4 for Industrial rack and pinon
This module provides assessment of your overall trainer skills -theoretical and practical. As an outcome of this assessment you will become one of the Alimak Group Trainers.
Pathway for Alimak Trainers at Level 5 for Construction
An Experienced Trainer with a 5 Star Technician Education can teach all Alimak courses below his level (4-1) This applies for courses part of the Pathway for Vertical Access Equipment based on a Rack and Pinion Technology for Construction.
Assessment for becoming Alimak Trainer at Level 5 for Construction
This module provides assessment of your overall trainer skills -theoretical and practical. As an outcome of this assessment you will become one of the Alimak Group Trainers.
Assessment for becoming Alimak Trainer at Level 4 for Construction
This module provides assessment of your overall trainer skills -theoretical and practical. As an outcome of this assessment you will become one of the Alimak Group Trainers.
Pathway for Alimak Trainers at Level 4 for Construction
An Experienced Trainer with a 4 Star Technician Education can teach all Alimak courses below his level (3-1) This applies for courses part of the Pathway for Vertical Access Equipment based on a Rack and Pinion Technology for Construction.
Mastering Control Systems for Alimak Construction rack and pinion products – ALC, VFC
The training shall provide the participant with the ability to perform safe planning and preparation before beginning any tasks. The participant will demonstrate safe work practices when handling equipment.
Commissioning for Installers and Maintainers for Alimak construction rack and pinion products
The training shall provide the participant with the ability to identify defects or the lack of defects using a range of techniques, to enable accurate assessment of the equipment’s condition and provide a concise report of findings.
Assessment checklist Star Level 5 for Industrial rack and pinion products
This is an assessment for being recognized as an Expert for Industrial rack and pinion products. Candidate is assessed via comprehensive checklist of criteria. The assessment includes both theoretical and practical skills. Assessments have to be conducted and signed by an approved person (Assessor) within Alimak Group organization.
Assessment for Star Level 5 for Construction rack and pinion products - Installer Track
This is an assessment for being recognized as an Expert (Installer Track) for Construction rack and pinion products. Candidate is assessed via comprehensive checklist of criteria. The assessment includes both theoretical and practical skills. Assessments have to be conducted and signed by an approved person (Assessor) within Alimak Group organization.
Assessment checklist Star Level 2 for Industrial rack and pinion products
This is an assessment for being recognized as an Apprentice for Industrial rack and pinion products. Candidate is assessed via comprehensive checklist of criteria. The assessment includes both theoretical and practical skills. Assessments have to be conducted and signed by an approved person (Assessor) within Alimak Group organization.
Assessment checklist Star Level 1 for Industrial rack and pinion products
This is an assessment for being recognized as an Operator of Industrial rack and pinion products. Candidate is assessed via comprehensive checklist of criteria. The assessment includes both theoretical and practical skills. Assessments have to be conducted and signed by an approved person (Assessor) within Alimak Group organization.
Level 3: Advanced Knowledge in Fault Finding and Programming of Controllers for Construction rack and pinion products
This is the third level Training plan, which is a part of the Technician Training Pathway for Construction Vertical Access Equipment Rack and Pinion Technology.
Level 2: Acquaintance with Controllers, Maintenance and Installation for Construction rack and pinion products
This is the second level Training plan, which is a part of the Technician Training Pathway for Construction Vertical Access Equipment Rack and Pinion Technology.